What you need
- A steel tape measure in inches (most Filipino tape measures show both cm and inches).
- Paper and pen, or your phone's notes.
- A photo of each opening helps us a lot.
Step by step
- Measure the width at three heights: across the top, the middle and the bottom of the opening, from wall to wall (or from the inside of the existing frame).
- Measure the height at three points: on the left, in the center and on the right, from the sill to the top of the opening.
- Use the smallest of each. Walls are rarely perfectly square. Using the smallest width and the smallest height makes sure the window fits.
- Write it as width × height, width first. For example 48 × 36 means 48 in wide and 36 in high.
- Note the quantity if several openings are the same size, and label each one (bedroom, kitchen, CR...).
Fractions are fine: type 48 1/2 or 48.5 in our estimator.
Replacing an old window?
Measure the opening the new window will sit in. If the old window has a hamba (the tubular aluminum frame installed before the main jamb) that will stay, measure inside it and choose without hamba in the estimator. If everything is coming out, measure the bare opening. Not sure? Read what is hamba or send us a photo.
Don't worry about being exact
Your measurement is for the preliminary estimate. Before fabrication we always do a free site measurement ourselves, and the final quotation is based on our measurement. Glass, especially tempered glass, has to be cut to the exact size, so we never fabricate from customer measurements alone.
Ready? Enter your sizes in the estimator.

